This tutorial was written
by Sebrina Holley on
May 5, 2012
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own.

For this Tutorial I'm using
The tubes out of the kit
Template #58 by Tamie. Thanks so much!  Here
Scrap kit is a Commerical Use Kit Called At The Sock Hop - by Jen @ Sleek N Sassy Designs. Thank you so much! You can get this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open your template
Ctrl+D to duplicate
Delete the copyright layer.


On Raster 3 Select all float and defloat and copy and paste paper 28 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster 5 Select all float and defloat and copy and paste paper 11 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster 6 Select all float and defloat and copy and paste paper 47 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Copy of 3 Raster Select all float and defloat and copy and paste paper 20 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster 7 Select all float and defloat and copy and paste paper 32 paste as a new layer then click invert and tap delete. Then unselect all and delete original.


Now you can use elements of choice or you can use the ones I did. Please use my tag as a reference!

Element 35 resize 35% 2 times place on top right of the template
Element 12 resize 64% then again at 25%
Element 23 resize 64% then again at 25% .
Element 21 resize 35% set on top of raster 5 rotate and set at an angle.
Element 6 resize 35% then again at 25%
Element 4 resize at 31% then again at 25%
Element 332 resize at 15% place above the juke box.
Element 632 resize at 15% place above the juke box
Element 40 resize 15% place above the juke box
Element 42 resize 25% place above the “café sign“
Green Blue Bling resize @ 50% and place below the café sign


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is DazzlinDivasDesign@yahoo.com

This tutorial was written
by Sebrina Holley on
May 5, 2012
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own.

For this Tutorial I'm using
The art of Keith Gravey.
You can get his artwork here at PTE
Template Creative Misfit Exclusive By Pooker Pooker and Vix Collob Template 2 . Thanks so much!  Here
Scrap kit is Pit Stop - by Kim @ Kims Korner. Thank you so much! You can get this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open your template
Ctrl+D to duplicate
Delete the copyright layer.


On Black Circle Select all float and defloat and copy and paste paper 5 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Grey Squares Select all float and defloat and copy and paste paper 19 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Dotted Circle Select all float and defloat and copy and paste paper 17 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On White Circle Select all float and defloat and copy and paste paper 6 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Red Rectangle Select all float and defloat and copy and paste paper 2 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Dark Grey Rectangle Layer Select all float and defloat and copy and paste paper 8 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Star Background Flood Layer Select all float and defloat and copy and paste paper 1 paste as a new layer then click invert and tap delete. Then unselect all and change blend mode to hard light.

On Word Art Select all float and defloat and copy and paste paper 15 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Layers of Word Art Back, Glitter Star Outline Flood, Star Outline Shadow, & Blasted Check Background leave them the way they are.


Now you can use elements of choice or you can use the ones I did. Please use my tag as a reference!

Trophy resize 35% Place in the top right of the template
Car 4 Mirror resize 50% place in the lower left under the word art layer
Light Tree resize 50% place between the r and the e in the word art behind the word art.
Oil Cart resize 50% place on top of the star line on the left.
Flags1 place behind the star layer DON’T RESIZE
Gas Can resize 50% place at the bottom right just off the template
Keychain resize 50% place at the very tip of the star.
Bow1 resize 50% place on top of the key chain circle
Tool Box resize 35% place at the bottom of the oil cart
Wrench resize 25% free hand rotate right place beside the tool box


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is DazzlinDivasDesign@yahoo.com

This tutorial was written
by Sebrina Holley on
May 5, 2012
Any resemblance to another
tutorial is purely coincidental. Do not copy this tutorial and post it through any group or claim it as your own.

For this Tutorial I'm using
The art of Keith Gravey.
You can get his artwork here at PTE
Template #345 By Missy. Thanks so much!  Here
Scrap kit is EMO GUGU - by Bibi @ Bibi Designs. Thank you so much! You can get this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open your template
Ctrl+D to duplicate
Delete the copyright layer, pixel wording and Yo DJ Word Art.
Upsize your template up by 125%

On Gradient Rectangle Layer Select all float and defloat and copy and paste paper 2 (the 2nd paper in the kit) paste as a new layer then click invert and tap delete. Then unselect all and change blend mode to overlay.

On Square Layer Select all float and defloat and copy and paste paper 3 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Circle Left Select all float and defloat and copy and paste paper 5 (the 2nd one in the kit) paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Large Circle 1 Layer Select all float and defloat and copy and paste paper 4 (the 2nd one in the kit) paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Circle Layer Select all float and defloat and copy and paste paper 4 (the 1st one in the kit) paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Gradient Rectangle Centre Layer Select all float and defloat and copy and paste paper 5 (the 1st one in the kit) paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Rectangle Centre Layer Select all float and defloat and copy and paste paper 6 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Thin Rectangle Layer Select all float and defloat and copy and paste paper 2 (the 1st one in the kit) paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Dotted Line & Dotted Line 1&2 Select all float and defloat and copy and paste paper 5 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Word Art Gurlz Like To Rock It 2 Layer Add Fat Gradient Glow.

On Layers of Glitter Rectangle, Dotted Line 1 & 2, Glitter Circle 1, Glitter Circle 2 , Large Circle 1, & Glittered Rectangle Centre Layers leave them the way they are.


Now you can use elements of choice or you can use the ones I did. Please use my tag as a reference!

Element 9 Paste over Gradient Rectangle Centre Layer
Element 92 Paste over circle layer
Element 43 Place on square layer rotate right and add gradient glow
Element 27 place just below word art layer
Element 64 Place on top of the chain link Duplicate and place above & on the Frame Layer
Element 30 resize 85% place to the left of word art layer
Element 25 resize 85% place to the top left
Element 37 & 38 resize 50% place under the frame layer side by side the word art layer
Element 54 Mirror and place on top of the frame layer
Element 55 mirror and place on top of the frame layer


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is DazzlinDivasDesign@yahoo.com

This tutorial was written
by Sebrina Holley on
May 5, 2012
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own.

For this Tutorial I'm using
The art of Jessica Dougherty.
You can get her artwork here at CDO
Template Circle Template By Sheild . Thanks so much!  Here
Scrap kit is Tropical Sun - by Brandy @ BLT. Thank you so much! You can get this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open your template
Ctrl+D to duplicate
Delete the copyright layer & Right and Left Flower.


On Purple Rectangle Layer Select all float and defloat and copy and paste paper 11 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Left Medium Circle & Right Medium Circle Layer Select all float and defloat and copy and paste paper 10 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On White Circle Layer Select all float and defloat and copy and paste paper 9 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Left Small Circle & Right Small Circle Layer Select all float and defloat and copy and paste paper 18 paste as a new layer then click invert and tap delete. Then unselect all and delete original.



Now you can use elements of choice or you can use the ones I did. Please use my tag as a reference!

Tiki Pole 1 & 2 resize 54% and place on each side of the template.
Umbrella resize 50% place in the center of the template
If you use the same tube that I use or one similar resize the grass skirt to 50% place over the tube and rotate left to fit on the tube and then stretch to meet the sides of the tube
Lizard resize 50% 2 times mirror and place at the top left of the template
Dragon Fly resize 2 times @ 50% mirror rotate right 3 times and place on the right side of the template
Flower 3 resize 25% place in the top center of the template
Spill place on the top of umbrella then duplicate and mirror.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is
DazzlinDivasDesign@yahoo.com

This tutorial was written
by Sebrina Holley on
May 5, 2012
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own.

For this Tutorial I'm using
The art of Suzanne Woolcott.
You can get her artwork here at Gorjuss Art
Template Tamie & Aqua Collab By Tami & Aqua. Thanks so much!  Here

Scrap kit is Magic Garden - by Diva @ Divas Designz. Thank you so much! You can get this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open your template
Ctrl+D to duplicate
Delete the copyright layer.


On Raster Layer 9 Select all float and defloat and copy and paste paper 4 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 12 Select all float and defloat and copy and paste paper 5 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 10 & Copy Of Raster Layer 10 Select all float and defloat and copy and paste paper 1 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 11 Select all float and defloat and copy and paste paper 6 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 5 Select all float and defloat and copy and paste paper 10 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 7 Select all float and defloat and copy and paste paper 9 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layer 3 & Copy Of Raster Layer 3 Select all float and defloat and copy and paste paper 3 paste as a new layer then click invert and tap delete. Then unselect all and delete original.

On Raster Layers 1, 4, Copy Of 4, 6, 2, and Copy of 2 leave them the way they are.


Now you can use elements of choice or you can use the ones I did. Please use my tag as a reference!

Pots 6 Place in the center of the template.
Ladbug3 resize 2 times by 50% place at the top right of the pots layer.
Ladybug1 resize 2 times by 50% place at the top left of the pots layer
Butterfly 4 resize 2 times by 50% and place at the top center of the pots layer
Flower 7 resize by 35% place into the pots and erase the stem. Duplicate and mirror
Flower 8 resize 35% place on the left side of the template
Flower 6 resize 35% place pm the right side of the template.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is DazzlinDivasDesign@yahoo.com